Misplaced Pages

Shitik

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Translation arrow iconThis article contains translated text and needs attention from someone fluent in Russian and English.
Please see this article's entry on Pages needing translation into English for discussion.
If you have just labeled this article as needing attention, please add
{{subst:Needtrans|pg=Shitik |language=Russian |comments= }} ~~~~
to the bottom of the WP:PNTCU section on Misplaced Pages:Pages needing translation into English. (August 2022)

The Shitik at Lena riverA Shitik on the Lena River in the 1890s
Class overview
NameShitik Russian: Шитик
BuildersBiryulka
General characteristics
Class and typeRiverboat
Notesa river flat-bottomed sail and rowing vessel
Shitik in Russian NorthEngraving of a Shitik in the north of Russia

Shitik (Russian: Шитик) is a small, broad-bottomed vessel in which parts of the hull have been sewed with belts or juniper and fir-tree rods called vinya (Russian: Виня).

Etymology

There are two proposed origins for the name of this boat. The first is that it comes from the verb Russian: Сшивать, meaning 'to sew'. This explains some of the design features of the boat. The second is that the shape of the boat is similar to that of larvae of Trichoptera, which are also called Russian: Шитик (shitik).

Types

The term Shitik refers to two different vessel types:

Sea Cargo Ship

The Shitik was a keeled vessel, powered by sail and oars. It was used as a sea trade and transport ship. The ship has a rounded-off bottom and, therefore, features a considerable expansion of the hull and disorder of boards. This design improves the ship's performance.

General Characteristics
Length 12 metres (39 ft) – 15 metres (49 ft)
Width 3 metres (9.8 ft) – 4 metres (13 ft)
Draft 0.18 metres (0.59 ft)
Hull height at midships 0.8 metres (2.6 ft)
load-carrying capacity 15 – 24 tons

Shitik had a single mast with a direct sail, oars, and a hinged wheel. The vessel had a canopy to protect the cargo from the rain although there is also a bunkhouse below the deck.

The underwater contours of the vessel allowed it to navigate in ice: when compressed it was squeezed out onto the surface. When docking the ship and hauling the anchor, Shitik needs the assistance of a vessel called osinovka boat.

It is believed that in the 13th century, the Shitik was the most widespread coastal transport vessel. Shitiks were mainly built between the 11th–17th centuries. Initially, Shitiks were built on the coast of the White Sea, and the Northern Dvina, Sukhona, Vychegda, Vetluga, and Tikhvinka rivers. Later the building of such boats also spread in Siberia and the Far East, since Shitiks plied the Pacific Ocean.

Shitiks were regularly used during the first phase of the Russian maritime fur trade in the North Pacific, from the 1740s to 1799, especially for exploring and collecting furs in the Aleutian Islands. They continued to be used in Russian America by the Russian-American Company in the early 19th century.

River boat

Shitiks were an important innovation on the Siberian rivers. Many shallows and reefs made a keel useless, and a shortage of nails made it necessary to improve techniques of sewing the planks. It was successfully operated throughout the 18th–20th centuries, being gradually replaced with new types of ship.

When artisan shipbuilders had the opportunity to use aluminium, the boat found a new niche. It is basically used by hunters and fishermen to reach inaccessible places in the taiga. Making Shitiks is popular on the Lena River in Siberia, Russia.

The design of the boat has been retained, but they are now made of aluminium sheet. Shitiks now have pointed bows instead of sawn-off ends. Sails are no longer used; they are powered by outboard motors.

Shitiks are useful in overcoming shoals; they have speed and adequate capacity. The absence of a keel is a problem, as it results to poor stability. Such a boat does not transfer a wave, and every movement of a passenger risks capsizing the vessel. But this combination of features suits hunters and fishermen, who can use it to cross rivers of 30 centimetres (0.98 ft) – 40 centimetres (1.3 ft) depth.

Well known Shitiks: on the First Kamchatka expedition under the command of Vitus Bering, an auxiliary vessel "Fortuna" boat-shitik was used (in other sources it was a two-masted Galiot)

See also

Notes

  1. ^ "# 31. "Fortuna" boat-shitik". Первая Камчатская экспедиция (in Russian). Russia: V. I. Zorin. Retrieved 2009-11-14.
  2. ^ "Суда Севера России". Russia: Россия Корабельная. Retrieved 2009-11-14. {{cite web}}: External link in |publisher= (help)
  3. ^ "# 59 Shitik 1 type". Открытие, освоение (in Russian). Russia: V. I. Zorin. Retrieved 2009-11-14.
  4. Grinëv, Andrei V. (Fall 2011). "Russian Maritime Catastrophes during the Colonization of Alaska, 1741–1867". The Pacific Northwest Quarterly. 102 (4). Translated by Bland, Richard L. University of Washington: 178–194. JSTOR 24624633. Retrieved 1 December 2020.
  5. ^ Ivanova, Maria (2007). Река Лена: От истока до устья. Якутск вечерний (in Russian). Retrieved 2009-11-04.
  6. Ostrovsky, Boris (1937). Великая северная экспедиция (in Russian). Vol. Первая камчатская экспедиция Беринга (2nd ed.). Arkhangelsk, Soviet Union: Севоблгиз. p. 61. Retrieved 2009-11-14.
Shipbuilding and shipping on the river Lena
Shipbuilding
Boatbuilding yards
Shipyards
Ship repair
River ports
Ship types
Well-known vessels
Well-known travels
River accidents
Significant persons
Media related to Lena River at Wikimedia Commons
Types of sailing vessels and rigs
Overviews
Sailing rigs
By sailing rigs
Multihull vessels
Naval and merchant
sailing ships
and other vessels
(by origin date)
Ancient
Post-classical
15th c.
16th c.
17th c.
18th c.
19th c.
20th c.
Fishing vessels
Recreational vessels
Special terms
Other types
Related
Categories: