Misplaced Pages

A backpack—also called knapsack, schoolbag, rucksack, pack, booksack, bookbag, haversack or backsack—is, in its simplest frameless form, a fabric sack carried on one's back and secured with two straps that go over the shoulders; but it can have an external or internal frame, and there are bodypacks.

Backpacks are commonly used by hikers and students, and are often preferred to handbags for carrying heavy loads or carrying any sort of equipment, because of the limited capacity to carry heavy weights for long periods of time with hands.

Large backpacks, used to carry loads over 10 kilograms (22 lb), as well as smaller sports backpacks (e.g. running, cycling, hiking, and hydration), usually offload the largest part (up to about 90%) of their weight onto padded hip belts, leaving the shoulder straps mainly for stabilizing the load. This improves the potential to carry heavy loads, as the hips are stronger than the shoulders, and also increases agility and balance, since the load rides nearer the wearer's own center of mass.

Terminology

The word backpack was coined in the United States in the 1910s. Moneybag and packsack were used prior, and now occur mainly as regionalisms.

The word rucksack is a German loanword mainly used in the UK, US and in other Western military forces. In Middle High German ruck(e) means "back" (dorsum), which led to the Upper German word ruggsack. In modern German the word "der Rucksack" is commonly used. The name rucksack is cognate with the Danish rygsæk, Norwegian ryggsekk, Dutch rugzak, Afrikaans rugsak, Swedish ryggsäck, and Russian рюкзак (rjukzak).

The word knapsack was the usual name for a rucksack or backpack up until the middle of the 20th century. This is commonly used in Canada.

Alternative names include haversack from the German Hafersack meaning "oat sack" (which more properly describes a small cloth bag on a strap worn over one shoulder and originally referred to the bag of oats carried as horse fodder), Kraxe (a German rucksack with a rigid framework), and bergen (a large load-carrying rucksack, from a design issued by the British Army during the Second World War).

Backpacks can often simply be referred to as "packs", especially in outdoors contexts; though sometimes ambiguous compared to other bags such as saddlebags and duffel bags, context is generally sufficient for identification. They are also used in recreational activities, and are used to carry sports equipment and other materials.

Before its various terminologies began appearing in print, evidence of early backpacks was scarce. A contender for the earliest was found within the mummified remains of Ötzi in 3300BC.

• Swiss army backpack c. 1960
• Integrated bearer (internal) frame (c. 1960)

Designs

Backpacks in general fall into one of four categories: frameless, external frame, internal frame, and bodypack. A pack frame, when present, serves to support the pack and distribute the weight of its contents across the body more appropriately, by transferring much of the weight to the hips and legs. Most of the weight is therefore taken off the shoulders, reducing the chance of injury from shoulder strap pressure (many backpacks equipped solely with shoulder straps can affect the posture of a person carrying more than 14 kg (30 lbs)), as well as being less restrictive of the upper body range of motion. Most backpacks are capable of being closed with either a buckle mechanism, a zipper, or a dry-bag type closure, though a few models use a drawstring fitted with a cord lock for the main compartment.

A bodypack is a backpack fitted with one or more pockets that are suspended on the wearer's chest and loaded in such a way that the load in the front and the load in the back are close to equal. The majority of the load in a bodypack is carried by the hips. The ideal load carrying system should not disturb the wearer's natural posture, balance and maneuverability. The load must be dispersed onto the skeletal structure in an even manner, and should not produce unbalanced forces on the body.

Frameless

The simplest backpack design is a bag attached to a set of shoulder straps. Such packs are used for general transportation of goods, and have variable capacity. The simplest designs consist of one main pocket. This may be combined with webbing or cordage straps, while more sophisticated models add extra pockets, waist straps, chest straps, padded shoulder straps, padded backs, and sometimes reflective materials for added safety at night. These packs are generally produced inexpensively.

Some outdoor packs, particularly those sold for day hikes, ultralight backpacking and mountaineering are sometimes frameless as well.

Sports

Sports and hydration backpacks are smaller with a profile closer to the body, wider straps and can come with water bladders and hip belts for running, cycling or hiking. Running hydration packs are the smallest and lightest, many under 2 L (0.44 imp gal; 0.53 US gal) and most under 6 L (1.3 imp gal; 1.6 US gal). Compression straps across the top of one's body are common as are hip belts. Cycling hydration packs are 6–10 L (1.3–2.2 imp gal; 1.6–2.6 US gal) sitting high on the back. Although daypacks are small averaging 10–30 L (2.2–6.6 imp gal; 2.6–7.9 US gal), all Trekking and Hiking hydration packs are generally the largest and heaviest. 35–65 L (7.7–14.3 imp gal; 9.2–17.2 US gal) and above are common.

External frame packs

External frame packs were designed to carry heavy loads above 20 kg (44 lb), giving the wearer more support and protection and better weight distribution than a simple, frameless strapped bag. Wooden pack frames were used for centuries around the world. Ötzi the Iceman may have used one in Copper Age Alpine Italy, though some archaeologists believe the frame found with the body was part of a snowshoe. Such packs are common in military and mountaineering applications; metal versions first appeared in the late-19th century.

The first external frame rucksack to receive a patent was made by Henry Clay Merriam, a U.S. Army officer during the late 19th century. Introduced in 1887, Merriam's innovative pack was made with drab duck canvas, which was attached to a light steel frame. In addition to two shoulder straps, the pack featured several leather straps that allowed the infantryman to attach his bedroll and canteen to the frame, instead of having them rest on his chest and hips. The most important feature, however, were the two hardwood rods that extended from the sides of the pack to leather pockets on a half-belt, which rested across the lower back and hips. This system allowed the pack to elevate off the back and shoulders, and thus transfer the weight of the load onto the hips. Though he tried in vain to sell his invention to the U.S. Army, he was only able to sell a few thousand packs to the New York National Guard, and the French and Austrian Armies.

Backpack design took another major leap forward with the introduction of the first aluminum external-frame backpack by Jack Abert, an avid hiker from Phoenix, Arizona. As a Boy Scout camp counselor, Abert saw first-hand how inadequate the backpacks scouts were using at that time, and set out to design a more comfortable pack. In 1947, he designed a contoured aluminum frame that was both strong and light, and shifted much of the weight off the shoulders and onto the hips. By 1950, his invention had received official approval from the National Council of the Boy Scouts of America, and by 1967, he had become the largest manufacturer of backpacking frames in the world.

Today's external frames are typically made from aluminum, other lightweight metal alloy, and recently reinforced synthetic polymers or plastic and is equipped with a system of straps and tautly-stretched netting which prevents contact between the metal frame and user's back. In addition to comfort, this "stand-off" provides the additional benefit of creating air circulation between the frame and the wearer's back. For this reason, external frame packs are generally considered to be a "cooler load" than internal frame designs. External frame packs have a fabric "sack" portion which is usually smaller than that of internal frame packs, but have exposed frame portions above and below the sack to accommodate attachment of larger items. In addition, the sack can often be removed entirely, permitting the user to customize the configuration of their load, or to transport a non-conventional load such as a quartered game animal. Military packs are often external frame designs due to their ability to carry loads of different shapes, sizes and weights.

A recently proposed type of external frame would be made from composite plastic, which is not flexible like current backpack straps are, and can be shaped like human spine curvature. In this type of backpack, the load would directly transfer to the shoulders through the non-flexible straps, helpful in preventing damage of long term backpack carrying. This non-flexible structure also diminishes the momentum at the lumbar region of the back. The strap curvature would be shaped closely to normal spine curvature, with two flexible drawstrings to minimize backpack movement along the transverse plane. The straps of this backpack would be wide enough to distribute the pressure on the shoulders, with an internal white glass wool layer to absorb dynamic forces from movement. This backpack type is experimental, needing further development before usage.

Internal frame packs

The internal frame backpack is a recent innovation, invented in 1967 by Greg Lowe, who went on to found Lowe Alpine and Lowepro, companies specializing in backpacks and other forms of carrying bags for various equipment. Lowe's innovation also featured the first side compression straps, the first modern sternum strap, and the first load stabilizers. Internal-frame packs have a large fabric section around an internal frame composed of strips of either aluminum, titanium or plastic, sometimes with additional metal stays to reinforce the frame. A complex series of straps works with the frame to distribute the weight and hold it in place. The internal frame permits the pack to fit closely to the wearer's back and minimizes shifting of the load, which is desirable when participating in activities that involve upper-body movement such as scrambling over rocky surfaces and skiing. However, the tight fit reduces ventilation, so these type of packs tend to be more sweaty than external frame packs. The internal construction also allows for a large storage compartment; a few lash points (including webbing loops and straps for sleeping bags and other large items) may be present, but as the frame is completely integrated, it is difficult to securely lash larger and heavier items which do not fit inside the compartment to the outside of the pack. Internal frame packs originally suffered from smaller load capacity and less comfortable fit during steady walking, but newer models have improved greatly in these respects. In addition, because of their snug fit, the improved internal frame models have largely replaced external frame backpacks for many activities.

Daily use

A daypack is a smaller, frameless backpack that can hold enough contents for a day hike, or a day's worth of other activities. They are not large enough for average wilderness backpacking that use full-sized sleeping bags and backpacking tents, but may be large enough for ultralight backpacking. Padded or unpadded waist straps may be provided to distribute weight across the body.

In many countries, backpacks are heavily identified with students, and are a primary means of transporting educational materials to and from school. In this context they are sometimes known as bookbags or schoolbags. The purchase of a suitably fashionable, attractive, and useful backpack is a crucial back-to-school ritual for many students.

Typical school backpacks generally lack the rigid frame of an outdoor-style backpack and include only a few pockets in the front in addition to the main storage compartment. While traditionally very simple in design, school backpacks are often made with padded shoulder straps and backs as well as additional reinforcement to hold large numbers of heavy textbooks, as well as safety features such as reflective panels to make the wearer of the pack more visible at night.

Backpacks are sometimes worn as fashion accessories, in which they perform the same function as a purse. Some such backpacks designed specifically for women are no larger than a typical purse, and are generally associated with younger women.

Special-purpose

Some backpacks are specifically designed to carry certain items. Common examples include backpacks for small valuable items such as laptops and cameras; backpacks designed to hold laptop computers in particular generally have a padded compartment to hold the computer and medium-sized pockets and flaps to accommodate accessories such as charger cables and mice. These are especially common in college and university settings. In order to supply these devices with electricity, a few high-end backpacks are equipped with solar panels.

Rolling backpacks are backpacks with wheels on the bottom and an extending handle. Because of their design, rolling backpacks reduce the strain on the user, though the shoulder straps may be used to carry the pack for short distances when the terrain is not suitable for wheels. Rolling backpacks are most commonly used while traveling by airplane or train.

Hydration backpacks are also available. These light daypacks are specifically designed to hold water in a special water bladder (also known as reservoir), and their purpose is to allow the carrier constant fluid hydration handsfree, so that the carrier can focus on their task without having to stop to get a water bottle out.

• A rolling backpack, a hybrid between a backpack and a rolling suitcase

Professional use

Backpacks are a standard part of the load-bearing equipment of soldiers, especially infantry, in most countries, and military-style packs are regularly available to civilians in military surplus stores. Well-known examples include the United States ALICE field pack and the British Army PLCE rucksack attachment, both of which are widely available to civilian markets both as actual military surplus (new or used) and as replicas. Such packs are often, though not always (e.g. the USMC's ILBE pack), external-frame packs, with the pack itself lashed or pinned to a metal or plastic carrying frame. For units that are entering combat situations, packs may be loaded heavily and can weigh in excess of 100 lb (45 kg). Each soldier may carry extra weapons, ammunition, rations, medical supplies, tents or other shelter material, and extra clothing.

Many police tactical units, as well as players of military-style combat games such as paintball and airsoft, use these military-style tactical backpacks and webbing for storing gear and ammunition. There is also a small but thriving industry devoted to creating historical reproductions of military gear; such companies generally produce period-appropriate uniforms and other gear in addition to backpacks.

Some more recent military/tactical designs, especially the MOLLE and ILBE packs used by the United States armed forces, are covered with webbing loop attachment points for increased carrying capacity.

Recently, at least one brand of backpack has been specially designed for professional cooks and culinary students. This sort of backpack is meant to safely carry knives, cooking tools, and other miscellaneous equipment such as notebooks, towels, and uniforms.

Specialist backpacks are used by fire services for wildfire fighting, as well as by rescue services for Search and Rescue. These backpacks are generally very modular, allowing the pack to be reconfigured to the users wishes and are designed to load around the wearers hips. They may include features such as sections for water bladders and specially designed pouches, such as those used to carry personal fire shelters.

Image gallery

• MOLLE patrol pack
• Tropical rucksack (back)
• Tropical rucksack (side)
• Tropical rucksack (front)
• Military backpack

See also

• Hunting bag
• Backpack palsy
• Bindle
• Duffel bag
• Fanny pack
• Hydration pack
• Messenger bag
• Pack basket
• Papoose
• Pasiking
• Satchel
• Shoulder strap

References

1. "Rucksack". Duden. Retrieved 22 June 2020.
2. "Haversack". Merriam-Webster. Retrieved 5 June 2017.
3. "National Army Museum: Bergen rucksack, War Department issue". Archived from the original on 24 February 2016. Retrieved 25 May 2020.
4. "The Backpack: Everything You Could Ever Need To Know". MAHI Leather. Retrieved 10 April 2018.
5. ^ Mallakzadeh, Mohammadreza; Javidi, Mehrdad; Azimi, Sirwan; Monshizadeh, Haniyeh (31 May 2016). "Analyzing the potential benefits of using a backpack with non-flexible straps". Work. 54 (1): 11–20. doi:10.3233/WOR-162293. PMID 27061701.
6. "The Iceman at the South Tyrol Museum of Archaeology". ArchaeologieMuseum.it. South Tyrol Museum of Archaeology. 2016. Retrieved 23 July 2019.
7. "The Three-Stick Roycroft Packframe". primitiveways.com.
8. "Mountaineers". mtn.tpl.lib.wa.us. Archived from the original on 1 November 2013. Retrieved 4 July 2007.
9. ^ Doran, Jeffrey J. (2023). Ramble On: How Hiking Became One of the Most Popular Outdoor Activities in the World. Amazon Digital Services LLC - Kdp. ISBN 979-8373963923.
10. "Innovations". Lowepro. Archived from the original on 30 June 2013. Retrieved 22 October 2008.
11. ^ Horovitz, Bruce (20 August 2007). "New 'badge' of cool: High-tech, high-fashion backpacks". USA Today. p. 1A.
12. Kalish, John (19 April 2009). "Sun Inspired: How To Build A Solar Backpack". NPR. Archived from the original on 23 April 2009. Retrieved 10 May 2009.
13. Carman, W.Y. (1977). A Dictionary of Military Uniform. Scribner. p. 99. ISBN 0-684-15130-8.

External links

• Media related to Backpack at Wikimedia Commons

• Bags
• Camping equipment
• Domestic implements
• Hiking equipment
• Luggage
• 1910s neologisms
• Ötzi