Misplaced Pages

7.62×38mmR

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Russian revolver cartridge Not to be confused with 7.62×39mm or 7.62×54mmR.
7.62×38mmR
Commercial production 7.62×38mmR (right) in comparison with .32 Smith & Wesson Long and .32 H&R Magnum
TypeRevolver
Place of originBelgium
Russian Empire
Service history
In service1895–present
Used byRussian Empire
USSR
Russian Federation
WarsRusso-Japanese War
World War I
Russian Civil War
World War II
Post 1945 conflicts
Production history
DesignerLéon Nagant
Designed1895
Specifications
Case typeRimmed
Bullet diameter7.82 (.308)
Neck diameter7.26 mm (0.286 in)
Shoulder diameter8.38 mm (0.330 in)
Base diameter8.94 mm (0.352 in)
Rim diameter9.855 mm (0.3880 in)
Case length38.86 mm (1.530 in)
Overall length38.86 mm (1.530 in)
Primer typeBerdan or boxer small pistol
Ballistic performance
Bullet mass/type Velocity Energy
6.3 g (97 gr) FMC 327 m/s (1,070 ft/s) 340 J (250 ft⋅lbf)
7 g (108 gr) FMC Flat Nose 306 m/s (1,000 ft/s) 324 J (239 ft⋅lbf)
Test barrel length: 114 mm (4.5 in)
Source(s):

7.62×38mmR (also known as 7.62 mm Nagant and Cartridge, Type R) is an ammunition cartridge designed for use in the Russian Nagant M1895 revolver.

A small number of experimental submachine guns (e.g., Tokarev 1927), designed by Fedor Tokarev, were also produced in a 7.62 mm Nagant chambering. None, however, were accepted into Soviet service.

Background

This section does not cite any sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (November 2011) (Learn how and when to remove this message)

The projectile is seated below the mouth of the cartridge, with the cartridge crimp sitting just above the bullet. When fired in the Nagant revolver, the crimp expands into the forcing cone, completing the gas seal and ostensibly increasing muzzle velocity by approximately 23 m/s (75 ft/s).

Commercially manufactured and loaded 7.62×38R cartridges are no longer difficult to find.

Most commercially loaded ammunition for the Nagant, including Fiocchi and the CCCP (Soviet Union) are marked yellow box imports, are target ammunition, and do not have great stopping power. The low power of these rounds has given the Nagant a reputation as an underpowered sidearm. However, the original military ball cartridges fired bullets in the 6.5 g (100 grains) range at up to 330 m/s (1,100 ft/s), making them close to the .32-20 Winchester and .32 H&R Magnum in power. One advantage of the round, if proper brass can be found, is that it leaves the chambers totally clean, and there is no need to scrape lead and powder residue out.

Soviet 7,62 mm Nagant Revolver ctgs of 1930s with brass and copper-washed steel (right) cases.

Handloading

7.62×38R (7.62 Nagant) cartridge (left) next to a .32 S&W Long Cartridge and a .22 LR cartridge for comparison.
7.62×38R Soviet military ammunition

Many users of this caliber handload their own ammunition. The proper brass cases are also expensive and difficult to come by. Handloaders have had success using dies for the .32-20 Winchester and .30 Carbine to handload the rounds. 32-20 Winchester brass cases are inexpensive, readily available, and can be reformed and used safely in guns chambered for 7.62×38R, but the resulting cartridges are too short to achieve the gas seal. Cut down. 223 Remington brass reformed in 30 carbine dies can be utilized to load for the Nagant also. These will achieve the gas seal, but the case rims will be undersized.

Three other cartridges, the .32 S&W, .32 S&W Long, and .32 H&R Magnum, will also generally chamber and fire in the revolver, but will not achieve the gas seal. The case head of the .32 S&W/H&R is about the same size as the case diameter of the Nagant cartridge, so the case head will sometimes actually end up moving into the chamber, thus preventing an adequate primer strike. Due to the dimensional differences between these cartridges and the original 7.62×38mmR cartridge, this practice is done at the shooter's own risk. The .32 H&R Magnum in particular develops much higher pressures than the 7.62 Nagant or either of the .32 S&W cartridges, which are both late 19th century developments. The most common anomaly when firing these cartridges is the bulging cases.

Producers

See also

References

  1. Schreier, Philip (July 18, 2022). "The Model 1895 Nagant Revolver". Shooting Illustrated: An Official Journal Of The NRA.
  2. Campbell, Dave (August 9, 2020). "The 1895 Nagant Revolver: A Look Back". American Rifleman.
  3. Herbert, Terril (June 6, 2017). "GUN REVIEW: RUSSIAN M1895 NAGANT REVOLVER IN 7.62X38R". Guns.com.
  4. Williams, Anthony G. (2012). Sub-Machine Gun: The Development of Sub-Machine Guns and their Ammunition from World War 1 to the Present Day. The Crowood Press UK. p. 62. ISBN 978-1847972934.
  5. Bolotin, David (1995). Soviet Small-Arms and Ammunition. Suomen Asemuseosaatio (Finnish Arms Museum Foundation, Finland). p. 44. ISBN 951-97184-1-9.
  6. Ezell, Edward (1988). The AK-47 Story: Evolution of the Kalashnikov Weapons. Stackpole Books. ISBN 0-8117-2247-3.
  7. "Nagant 1895". Archived from the original on 2007-09-30. Retrieved 2007-05-28.
  8. 7,62-мм револьверные патроны "Наган" // А. И. Благовестов. То, из чего стреляют в СНГ: Справочник стрелкового оружия. / под общ. ред. А. Е. Тараса. Минск, «Харвест», 2000. стр.524-525
  9. Александр Борцов. Патроны Польши // журнал "Мастер-ружьё", № 9 (114) 2006. стр.70-73
  10. BPrvi Partizan 7,62 mm Nagant
Rimmed cartridges
Handgun and Carbine
Shotgun
Intermediate
Fully powered
Autocannon
  • 20×99mmR
  • 20.3×95mmR
  • 20×145mmR
  • 20×180mmR
  • 25×193.5mmR
  • 25x205mmR
  • 25x187mmR
  • 37x57mmR
  • 37x94mmR
  • 37×145mmR
  • 37x190R
  • 37×223mm. R
  • 37×249mmR
  • 37×250mmR
  • 37×254mm. R
  • 37×258mmR
  • 37x268mmR
  • 37x380mmR
  • 40×158mmR
Artillery
  • 40×304mmR
  • 40×311mmR
  • 47x351R
  • 57×441mmR
  • 57×464mmR
  • 75x272mmR
  • 75x350mmR
  • 76.2×420mmR
  • 76.2×583mmR
  • 84x295mmR
  • 88x292mmR
  • 94x92mmR
  • 94x206R
  • 94x675mmR
  • 94x857mmR
  • 113 640–645mmR
  • 114x73-86mmR
  • 114x695mmR
  • 133x782mmR
Flare and Riot
Blank
Carbine cartridges
Carbine cartridges
Carbine capable handgun
Other
Soviet infantry weapons of World War II
Side-arms
Rifles and carbines
Submachine guns
Grenades
Machine guns
Anti-tank rifles and flamethrowers
Cartridges
Categories: