Misplaced Pages

Krummlauf

Article snapshot taken from Wikipedia with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
Gun barrel attachment used for shooting around corners

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Krummlauf" – news · newspapers · books · scholar · JSTOR (May 2021) (Learn how and when to remove this message)
A Sturmgewehr 44 with 90 degree Krummlauf
The Krummlauf on display at the Bundeswehr Museum of German Defense Technology in Koblenz, Germany.

The Krummlauf (English: "curved barrel") is a bent barrel attachment for the Sturmgewehr 44 (StG 44) rifle developed by Germany in World War II. The curved barrel included a periscope sighting device for shooting around corners from a safe position.

Description

It was produced in several variants: an "I" version for infantry use, a "P" version for use in tanks (to cover the dead areas in the close range around the tank and defend against assaulting infantry), versions with 30°, 45°, 60° and 90° bends, a version for the StG 44 and one for the MG 42. Only the 30° "I" version for the StG 44 was produced in many numbers.

The bent barrel attachments had very short lifespans—approximately 300 rounds for the 30° version, and 160 rounds for the 45° variant—as the barrel and bullets fired were put under great stress. Another problem besides the short life-span was that the bending caused the bullets to shatter and exit the barrel in multiple fragments, producing an unintended shotgun effect. As a result, weapons designers experimented with small vent holes drilled into the Krummlauf's barrel in order to reduce pressure and recoil, allowing the discharged bullets' built-up gases to be released to slow the bullet's velocity as it turned to exit the barrel. Nevertheless, the Krummlauf's lifespan remained the same. A triangular shield was also added to prevent venting gasses from clouding the mirror and optics.

The 30° model was able to achieve a 35x35 cm grouping at 100m.

The Krummlauf in a Maschinenpistole Vorsatz (P) mount was developed as an alternative close defence weapon for tank destroyers. This mount was fitted to a roof hatch in many Panzer IV/70 (A) vehicles. The tank crew could then attach a StG 44 and use this as a close defence machine gun.

Derivatives

Experiments to adapt the Krummlauf to the PPSh-41 were conducted by the Soviet Union.

See also

References

  1. McCollum, Ian (4 September 2014). "Krummlauf Curved Barrel on an StG-44". Forgotten Weapons. YouTube. Archived from the original on 2021-12-21. Retrieved 30 October 2018.
  2. Berg, Bill (January 8, 2008). "Unusual PPSh-41s". Bill's PPSh-41 Pages. Retrieved 2022-10-11.

External links

Categories: