 | This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Frost line" polymers – news · newspapers · books · scholar · JSTOR (December 2023) (Learn how and when to remove this message) |
In plastic film manufacturing by extrusion, the frost line is the point beyond the die where the temperature of the molten plastic falls below the softening point, the diameter of the extruded plastic bubble stabilizes due to the solidification of the polymer. The term was borrowed from the notion of "frost line" in soil science and refers to the frosted appearance due to loss of transparency of the plastic film above the "frost line".It is sometimes called freeze line, while other disstinguish the concepts of frost/freeze line.
The distance from the die is called the height of the frost line. It depends on various factors, including the melt temperature, the speed of cooling, the extrusion speed, and the diameter of the bubble. The notion is important, since the higher the frost line, the more difficult to control the uniformity of the film thickness.
For example, a higher frost line due to higher melt temperature and/or lower cooling rate means a longer time to solidify, and a more smooth and transparent film is produced.
References
- Structure Evolution During Film Blowing: An Experimental Study Using In-situ Small Angle X-Ray Scattering
- ^ Blown Film Frost Line-Freeze Line Interactions, 1993 Polymers, Laminations & Coatings Conference Proceedings
- ^ Polymer Processing and Structure Development, p .17